Home > Dvd Drive > Trouble With SATAII Drive And DVD Drive

Trouble With SATAII Drive And DVD Drive


DVD drive on purple ports in IDE mode. Sony? Just on this info noted and to be absolutely clear: ‘They lack a firmware to use SSD drives at all unless they ship with a SSD drive from the factory' OWC The data doubler kit does not support my model? (please confirm this is true - or can I actually do it) 2. check my blog

Windows will throw a whole bunch of communication errors. Is it legal to use handheld radios to listen to aviation frequencies in the USA? If you are using a product like our Data Doubler, we still recommend only using a SATA Revision 2.0 (3Gb/s) drive in that bay. The technical specs clearly state : Storage 750GB 5400-rpm Serial ATA hard drive; optional 500GB 7200-rpm hard drive or 128GB, 256GB, or 512GB solid-state drive, There is nothing about it only

Ahci Compatible Dvd Drive

Hardware & Devices Installing more than one SATA Drive problem...Solved!I read a few people having problems when trying to install multiple drives not being recognized, system hanging etc.. Like anything, can always be exceptions - but current testing and reporting indicates 6Gb/s is now good across both bays for all 2012 models. This is outrageous!

And the DVD is recognized inside BIOS.The COMP no longer recognizes the DVD Burner and cannot load or write a Disc with AHCI/ACHI mode.I guess I'll have to re-enable IDE Mode.. OWC External Drives Easily expand your storage with durable external drives from OWC. This connection was not tested or certified by anyone to support 6Gb/s devices. Re: sata dvd drive not detected « Reply #5 on: May 03, 2012, 05:46:00 PM » Quote from: meterbox on May 03, 2012, 09:13:20 AMdarkages: your suggestion worked; I had the

Low price was too good to be true. Ahci Vs Ide Wait and hope that Apple fixes this someday 2. So far, works like a champ (1 day). http://www.sevenforums.com/hardware-devices/127357-sata-dvd-drive-driver-problem.html The idea being, that I would Install Windows 7 Ultimate 64 bit via the onboard Marvell controller in Raid 0.

I tried rescan disks with no success. Changed... There is no extra partition required for the boot manager. I had the same problem.

  1. This is because the chipset (P45) can only handle 6 SATA ports, and no IDE.
  2. I checked my device manager and it has a yellow triangle and says power failure.
  3. This can be used as a workaround in case your CD/DVD ROM drive cannot boot , and for other things besides.
  4. Member Posts: 34 Re: sata dvd drive not detected « Reply #4 on: May 03, 2012, 09:13:20 AM » darkages: your suggestion worked; I had the dvd burner plugged into a

Ahci Vs Ide

Like the power cord versus the internal power connector, the USB interface or a IDE connector. Is yours? Ahci Compatible Dvd Drive Plug the DVD drive into one of them!! It's all...

Is your board a GA-EP45T-UD3P?Someone does make an interface for a IDE to SATA controller. http://hcsprogramming.com/dvd-drive/using-an-external-dvdrw-drive-like-a-hard-drive.php It requires manufacturers to provide owners and independent repair businesses with fair access to service information and replacement parts. Still no joy. I had a look at the "change, add, or remove drive letter" page.

Reply Sean John November 18, 2009 at 12:02 am Good article. I interested in fastest boot up possible? I am a car. http://hcsprogramming.com/dvd-drive/trouble-connecting-new-dvd-drive.php Even booting from Original HD recovery partition would cause instant boot to install error.

I am struggling to understand what is going on. Tell them that you believe repair should be fair, affordable, and accessible. Dijkstra path finding in C# is 15x slower than C++ version If a new nation was founded in a federation like the European Union, what kinds of names might it be

Axiom of choice, Banach-Tarski and reality Handling extensive in-system travel in Traveller Numbers x such that x^2 divides 7^x-1.

Please zoom the Apple System Profiler that indicates both bays in the 13-inch system has two 6Gb data 3.0, and please add a shot of the mixed version. If you do is your question, specifically, will a SATA III device work with it? I am just wondering if there have there been any further developments on this matter at all? Member Posts: 34 Re: sata dvd drive not detected « Reply #3 on: May 02, 2012, 08:10:21 PM » Old-Polack:the os does not see the dvd drive at all.

I currently have replaced the original drive with the OWC 240GB 6G SSD drive. The DVD won't work, not even a CD-ROM.I have to leave the DVD drive set to IDE for the drive to work. Sometimes these drives get stuck closed and you cannot open them. http://hcsprogramming.com/dvd-drive/trouble-shooting-dvd-drive-running-vista.php We're available online and on the phone 24/7.

I even re-enabled TRIM and spotlight. We need to know fast! AHCI mode in a ASUS P5G41CM-LX-*HELP* HELP: How to change IDE to AHCI mode for Intel P45 mobo Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Released February 2011 / 2.0, 2.2, or 2.3 GHz Quad-core Intel Core i7 Processor hdd replacement optical bay hdd 341 Questions View all Allanciano @allanciano Rep: 11 Posted: 07/26/2016 Options Permalink

In summary: 2011 MacBook Pro 13″ = Main Bay 6Gb/s, Optical Bay 6Gb/s A-OK. 2011 MacBook Pro 15″ & 17″ = Main Bay 6Gb/s A-OK. The Fair Repair Act, or LB 67, is simple. After using the patch and rebooting, the drives should reappear. You can not post a blank message.

This problem also may arise if there is underlying trouble with the Input-Output system of the machine: for example, interactions with controllers like Promise or Highpoint, or with special drivers. Another 17” we purchased in April works as expected with no issues. Thanks, /kr OWC Michael @ 9:03 am on September 14, 2011 No, the MacBookPro3,1 models use an Ultra ATA Optical drive, not a SATA drive - so the Data Doubler will