Home > Hard Drive > Trouble With 160GB SATA Drive

Trouble With 160GB SATA Drive

Contents

Once I put it on it's own IDE channel, can I boot from the primamry drive and run your program on this drive? Join our forums …maybe some of the other techs will have ideas. Sometimes there is info on the drive that the recovery disks look for when installing. Magic cases These include things like HDD firmware bugs (believe me, there are plenty of them). check my blog

Many Thanks Aran October 30, 2012 Dave Aran, please post this in our forums http://www.pctechbytes.net so we can troubleshoot. MHDD can also access DCO (Device Configuration Overlay), and that allows you to not only change hard drive's capacity, but also switch some hard drive functions, such as LBA48 support, Security Then you can see if you see and save stuff to the drive. So, how do I get the Capacity Restore tool to recognize and restore the capacity on my hdd? his explanation

160gb External Hard Drive

my 1 TB harddrive which had all my data on was reporting on 33 MB and coming up as RAW in Windows. The Toshiba back to its original 60gb :-) THANK YOU THANK YOU THANK YOU!!!! So where's the fun in that?

as if it had been set to RAID . Full of bad sectors. i'm afraid your software didn't work with my hdd. 160 Gb Hard Drive Enough On the PC I managed to wipe the partitions and create a new fresh GPT partition map and FAT32 partition.

I took it apart and reset the hdd as recommended but that did nothing. 160gb Sata Internal Hard Drive Drive Shows Up In BIOS But Not In Windows This is the more typical scenario. Manish jha Personal data deleted by a moderator Report dork- Sep 8, 2009 at 07:27 AM too late for firmware upgarde. Found this software and bingo had my original drive back in seconds.

I used it in a PIII with DDO with windowsxp and linux. Wd1600aajs Jumper Settings It just allows you to restore that capacity in case other software or PC distributor reduced it. http://www.computerbase.de/forum/archive/index.php/t-135480.html u can test the disk with ‘TestDisk' and set the disk partition to primär and u get the data back

scrieler on May 26, 2008 6:18 pm Hi Dmitry, Thanks July 13, 2012 Dave I don't suppose you have an external enclosure you can try it in.

  1. Your explanation put my mind at rest.
  2. Members can monitor the statuses of their requests from their account pages.
  3. View all 8 comments Report chrsjenko- Aug 2, 2009 at 02:38 PM Apparently if you contact Seagate using there web site ( http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance/ ) and your drive is not an OEM
  4. It makes sense to present it to us (the customer) in this way.

160gb Sata Internal Hard Drive

i dont know who was the problem, that change 250gb -> 137 gb. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/troubleshootResults?sp4ts.oid=5045418 Thanks in advance June 16, 2012 Mark Hi, i am running two hardrives a 74gb WD and a 1.5TB WD both SATA drives, the problem I am having is that sometimes 160gb External Hard Drive Thats ok. 160gb Laptop Hard Drive So I downloaded a bios from DELL for this machine.

Hmm nice idea.... http://hcsprogramming.com/hard-drive/sata-install-trouble.php Since both are in my pc, I cannot tell you atm what the serial is, but they are 250gb.Sorry. I have changed the cell of motherboard and reset the bios but still no positivity. Your current motherboard would not benefit from having SATA II as transfer rates on the board are slower that newer boards and chipsets. Wd1600aajs Specs

Can you please help me to solve this problem that I could recover some data? Ok, went out and bought an OCZ SATA3 SSD for primary boot drive, as well as a WD SATA3 HDD as storage drive. There are few other softwares installed. http://hcsprogramming.com/hard-drive/trouble-with-adding-a-new-sata-drive.php Ask a question and give support.

i still don't understand why it still does that. Western Digital 160gb Sata Hard Drive today i found that my older WD isnt working/spining just as no power is going into it i tried to change cables but still, its the hdd fault. Then windows will read it fine, then on a power off same thing blue screen again.

The hard drives have applications that I can't replace.

However I contacted SeaGate and they agreed to replace my drive. I've tried many different jumper settings, but nothing would work. worked like a champ. (I had to first "uninstall" the drive from windows, which i think did it partially automatically) but once so and rebooted, the program worked perfect and i Wd1600aajs Not Detected Clicked install and bang, windows pop up saying i shouldnt install the drive.

i tried in another PC, had swapped every cable and tried in several OS..but result it same… is there anything with the harddisk logic card or its firmware?? Thankyou soooooooooo much.

Craig on March 5, 2008 1:55 pm How can I install 80GB HDD to old PC which BIOS accept max. 8GB HDD?

Thomas on March 11, any help would be very much appreciated. More about the author Installing the drive on other computers detected the same capacity, and the partitions didn't show on those other computer "MyPC" (but the drive itself is shown on Device Manager).

I spent more than 14 hours, and your tool made it in a second :)

Iaroslav Tsaryk on March 23, 2008 2:28 am Terry: This program does not perform any Ask a question and give support. Thanks

Dmitry Postrigan on October 16, 2007 1:52 am is there free tool inverse (oposite) to Restoring Factory Hard Drive Capacity to reduce hdd capacity

japs on October 18, If there is data on the drive you need, you can try hooking it up to an external case or installing it as a second drive in a working computer and

I seen a post over on utube where a guy froze a drive to get it to maybe work one last time. I'm worried why is not it working when i connect it on the motherboard. If you have a hard drive running in your computer it is only a matter of time before it fails. Unfortunately, after install (v 1.2) and running your program it does seem to be working properly.

There is a jumper involved on a Seagate SATA HDD, but, it's there to hold the drive in SATA 150....,, remove the jumper and it will run as SATA 2 (300Gbs). This may still be the case.After you have repaired your drive, you can apply the following firmware update.Firmware Update for ST3500320AS, ST3500620AS, ST3500820AS, ST3640330AS, ST3640530AS, ST3750330AS, ST3750630AS, ST31000340AS [207951]:http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207951If the Windows They have replaced 2 of my drives including a Maxtor that Seagate took over. March 7, 2012 DuROi Hi Dave, i have a old Vaio VGN-FS115M with a Hitachi 80Gb hard disk.

my pc doesn't show windows. Thank you for your job and for sharing this to everyone.

babble on February 22, 2008 7:25 pm He utilizado este progranma y me ha recuperado un disco de 250 Can I get any data from it? Dmitry

Dmitry Postrigan on October 11, 2007 2:06 pm any chance to be able to add a optional raid controller driver to see my raid drives?

BEFORE the update the geometry of the disk was CHS -> 19857 / 16 / 63 OR LBA -> 1246 / 255 / 63 AFTER the update the geometry went down In my experience, though, partition problems should not cause the drive to not be detected in BIOS. I will call Seagate in the morning. There is no jumpers on the 160GB drive however there is a set of 4 pins in the back Jan 9, 2008 #10 saik0pod TS Rookie Topic Starter Anyone have

Jan 12, 2008 #42 saik0pod TS Rookie Topic Starter Can anyone suggest? I bought SATA II cables for my 80GB and 160GB.